Chem-Tech Laboratories has facility for testing of technical cleanliness of components as per ISO 16232, VDA 19 and other internatinal specifications. Component Cleanliness Contamination removal from components used in automotive, aerospace, hydraulics and production systems is becoming increasingly important as suppliers, producers and end users look for better reliability of components and products.

The component cleanliness testing service primarily uses a flushing/pressure rinse method for the removal of contamination from components, hoses, pipes, injectors, pumps, valves, radiators, engine blocks, cylinder heads, cranksahfts and manifolds. The flushing liquid is drawn through a membrane filter and analysed with a Leica microscope to count particles and weighed to give a gravimetric weight in mg.

The microscope analysis identifies the quantity of particles in different size classes including longest particle and fibres according to the applicable test standards applied. Results are recorded and sent to the customer in a report as per the template below.

The microscope system can categorise particles into reflective and non-reflective to give an indication on the ratio of metallic and non-metallic particles.

Benefits of Technical Cleanliness Testing
  • Ensure compliance to ISO 16232
  • Prevent Component Reject from customer Quality team
  • Ensure Product Quality
  • Identify micro level contaminants
  • Classify size, shape and type of contaminants on the component
  • Enhance Component life and extend warranty
  • Prevent Premature failures