Mining fleet lubricant changeover: from first drum to first in-service sample

A practical guide to mining fleet lubricant changeover: from first drum to first in-service sample.

All technical articlesDiscuss a testing requirement
Chem-Tech Laboratories

Article overview

What this technical guide covers

Use the section guide to move directly to the operating problem, evidence or testing decision most relevant to your requirement.

  1. 01Start with the decision
  2. 02Collect the right evidence
  3. 03Document the next action
01

Article section

Start with the decision

Check the first delivery against the purchase specification and retain a traceable new-oil sample. Record which machines received the new product and which still contain a blend of old and new oil.

02

Article section

Collect the right evidence

Set a consistent in-service sampling point and record hours, duty, top-ups and maintenance. A change in additive elements after a switch may reflect formulation rather than wear; compare with the new-oil baseline before interpreting the trend.

03

Article section

Document the next action

Use the first sample to establish context and agree on a follow-up interval. Investigate persistent changes alongside inspection and operating evidence before making fleet-wide decisions.

Apply this guidance

Related services and practical resources

Laboratory testing support

Turn the operating symptom into a focused test plan.

Request a QuoteContact Chem-Tech